Value-Added Distributor and Application Specialist
of Process Equipment and Control Products

Products

EH Series Proportional Relieving & Reducing Valve

These valves consist of a small size but high performance electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally through a controlled input voltage. Moreover, a good response speed in reducing the pressure even at a large load capacity can be obtained with the relief function of the valves.  ...

E Series High Flow Control & Relief Valve

This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. For the High Flow Series, double maximum flow rate [03 size: 125→250 L/min (33.03→66.05 U.S.GPM), 06 size: 250→500 L/min (66.05→132.1 U.S.GPM), 10 size: 500→1000 L/min (132.1→264.2 U.S.GPM)] enables a smaller valve size than conventional products; compact-sized devices can be provided.  ...

DSG-03 Series Solenoid Operated Directional Valves – Plug-In

These are epoch-making solenoid operated valves of high pressure, high flow which have been developed incorporating a unique design concept into every part of the valve including the solenoid. With wet type solenoids, these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valves. ● Wide Range of Models Choose the optimum valve to meet your need from a large selection available. The DSG-03 50 design series solenoid...

DSG-03 Series Solenoid Operated Directional Valves – Terminal Box

These are epoch-making solenoid operated valves of high pressure, high flow which have been developed incorporating a unique design concept into every part of the valve including the solenoid. With wet type solenoids, these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valves. ● Wide Range of Models Choose the optimum valve to meet your need from a large selection available. The DSG-03 50 design series solenoid...

DSG-01 Series Solenoid Operated Directional Valves – Plug-In

● High Pressure & High Flow Rate In comparison to our existing lines, both the pressure and flow of these valves are much increased. Max. Operating Pressure: approx. 10 % increased [31.5→35 MPa (4570 →5080 PSI)] Max. T-Line Back Pressure: approx. 30 % increased [16→21 MPa (2320 →3050 PSI)] Max. Flow Rate: approx. 60 % increased [63→100 L/min (16.64 →26.42 U.S.GPM)] ● Low Pressure Drop The pressure drop of these valves is reduced by...

DSG-01 Series Solenoid Operated Directional Valves – Terminal Box

  ● High Pressure & High Flow Rate In comparison to our existing lines, both the pressure and flow of these valves are much increased. Max. Operating Pressure: approx. 10 % increased [31.5→35 MPa (4570 →5080 PSI)] Max. T-Line Back Pressure: approx. 30 % increased [16→21 MPa (2320 →3050 PSI)] Max. Flow Rate: approx. 60 % increased [63→100 L/min (16.64 →26.42 U.S.GPM)] ● Low Pressure Drop The pressure drop of these valves is reduced by...

M Series Electric Motor

The M Series electric motor mounts directly to PV2R series vane pump and AR / A / A3H variable piston pumps. It has outputs available from 0.75~18.5kW. It is available in two formats: the M3~M7, which is a bell housing types; and a direct coupling type, the M1, M2, which has a hollow shaft.  ...

Compact Power Amplifier

Compact power amplifiers for 10Ω proportional solenoids. The power supply is 24 V DC. It uses a new circuitry to be slow to heat  ...

Power Amplifier

These power amplifiers can drive two solenoid of 10Ω load simultaneously or separately, and the control can be done in the same way even though the object is separated by pressure system and flow rate system. Although the display of control unit on the front panel is PRESS and FLOW , they are exactly the same circuit, so there is no distinction between the two system when used.  ...

Power Amplifier

These power amplifiers can drive two solenoid of 10Ω load simultaneously or separately, and the control can be done in the same way even though the object is separated by pressure system and flow rate system. Although the display of control unit on the front panel is PRESS and FLOW , they are exactly the same circuit, so there is no distinction between the two system when used.  ...

Our Suppliers