Products

● High Pressure & High Flow Rate

In comparison to our existing lines, both the pressure and flow of

these valves are much increased.

Max. Operating Pressure: approx. 10 % increased [31.5→35 MPa
(4570 →5080 PSI)]
Max. T-Line Back Pressure: approx. 30 % increased [16→21 MPa
(2320 →3050 PSI)]
Max. Flow Rate: approx. 60 % increased [63→100 L/min (16.64
→26.42 U.S.GPM)]

● Low Pressure Drop

The pressure drop of these valves is reduced by 10 % from 1.0 to 0.9

MPa (145 to 131 PSI), in comparison to our existing lines*; the valves

effectively reduce the energy consumption of the unit.

{* At Flow Rate: 60 L/min (15.9 U.S.GPM), Spool Type: 3C2 (P→A)}

● Compact & Small Mass

Despite of high pressure, high flow and low pressure drop, these valve

bodies are compact and lightweight with DC double solenoids; the

overall length and mass are reduced from 210 to 205 mm (8.26 to 8.07

inch) and from 2.2 to 1.85 kg (4.85 to 4.08 lbs), respectively.

● Shockless type available

In addition to the standard valves for high pressure and high flow, a

shockless type capable of minimizing noise and vibration in piping

during spool changeover is also available.

● Stable Operation

Due to the powerful magnetic and spring force of the solenoids, these

valves exhibit a high tolerance to contaminants and especially stable

operation.

● IP65-equivalent high dust- and water-proof

These valves demonstrate excellent dust- and water-proof

characteristics, in compliance with I. E. C. Pub. 529. IP65 and JIS C

0920 IP65 (dust- and jet-proof type).

● Usable in products of various standards

These standard valves are CE certified for installation in equipment overseas.

UL/CSA certified products are also available.

● High Pressure & High Flow Rate

In comparison to our existing lines, both the pressure and flow of

these valves are much increased.

Max. Operating Pressure: approx. 10 % increased [31.5→35 MPa
(4570 →5080 PSI)]
Max. T-Line Back Pressure: approx. 30 % increased [16→21 MPa
(2320 →3050 PSI)]
Max. Flow Rate: approx. 60 % increased [63→100 L/min (16.64
→26.42 U.S.GPM)]

● Low Pressure Drop

The pressure drop of these valves is reduced by 10 % from 1.0 to 0.9

MPa (145 to 131 PSI), in comparison to our existing lines*; the valves

effectively reduce the energy consumption of the unit.

{* At Flow Rate: 60 L/min (15.9 U.S.GPM), Spool Type: 3C2 (P→A)}

● Compact & Small Mass

Despite of high pressure, high flow and low pressure drop, these valve

bodies are compact and lightweight with DC double solenoids; the

overall length and mass are reduced from 210 to 205 mm (8.26 to 8.07

inch) and from 2.2 to 1.85 kg (4.85 to 4.08 lbs), respectively.

● Shockless type available

In addition to the standard valves for high pressure and high flow, a

shockless type capable of minimizing noise and vibration in piping

during spool changeover is also available.

● Stable Operation

Due to the powerful magnetic and spring force of the solenoids, these

valves exhibit a high tolerance to contaminants and especially stable

operation.

● IP65-equivalent high dust- and water-proof

These valves demonstrate excellent dust- and water-proof

characteristics, in compliance with I. E. C. Pub. 529. IP65 and JIS C

0920 IP65 (dust- and jet-proof type).

● Usable in products of various standards

These standard valves are CE certified for installation in equipment overseas.

UL/CSA certified products are also available.

These are epoch-making solenoid operated valves of high pressure, high flow

which have been developed incorporating a unique design concept into every

part of the valve including the solenoid. With wet type solenoids, these

valves ensure the low noise and the long life, moreover, ensure no leakage of

oil outside of the valves.

● Wide Range of Models

Choose the optimum valve to meet your need from a large selection available.

The DSG-03 50 design series solenoid operated directional valves are

classified into the two basic models.

Standard type …. Useable at high pressure: 31.5 MPa (4570 PSI) and high
flow: 120 L/min (31.7 U.S.GPM)
Shockless type …. A noise at spool changeover and a vibration in piping
can be reduced to a minimum.

● Stable Operation

With a strong magnet and spring force, the valves are tough against

contamination and thus ensure a stable operation.

● Usable in products of various standards

CE/UL/CSA certified products are available.

These are epoch-making solenoid operated valves of high pressure, high flow

which have been developed incorporating a unique design concept into every

part of the valve including the solenoid. With wet type solenoids, these

valves ensure the low noise and the long life, moreover, ensure no leakage of

oil outside of the valves.

● Wide Range of Models

Choose the optimum valve to meet your need from a large selection available.

The DSG-03 50 design series solenoid operated directional valves are

classified into the two basic models.

Standard type …. Useable at high pressure: 31.5 MPa (4570 PSI) and high
flow: 120 L/min (31.7 U.S.GPM)
Shockless type …. A noise at spool changeover and a vibration in piping
can be reduced to a minimum.

● Stable Operation

With a strong magnet and spring force, the valves are tough against

contamination and thus ensure a stable operation.

● Usable in products of various standards

CE/UL/CSA certified products are available.